|
Chrome Vanadium Splitting Chisel |
These Air hardened chrome Vanadium Steel Chisels last much
longer than cold chisels. The cutting edges are accurately
ground, with specially tempered non-spread heads. The
splitting chisel is ultra thin, enabling a clean rock cut and
reducing vibration.
|
|
Code |
NZD ($) |
Stock Status |
|
240mm x 25mm (wide) |
GE7038 |
$ 29.90 |
|
|
|
|
Chrome Vanadium Safety Chisel |
These Air hardened chrome Vanadium Steel Chisels last much
longer than cold chisels. The cutting edges are accurately
ground, with specially tempered non-spread heads. This chisel
has a special guard to protect your hands when miss hitting the
chisel.
|
|
Code |
NZD ($) |
Stock Status |
|
300mm x 32mm (wide) |
GE7007 |
$ 47.20 |
|
|
|
|
Chrome Vanadium Steel Chisels |
These Air hardened chrome Vanadium Steel Chisels last much
longer than cold chisels. The cutting edges are accurately
ground, with specially tempered non-spread heads. There are
two handle types, either Octagonal or Flat. The flat versions
have a longer handle, but the Octagonal chisels are thicker.
|
|
Code |
NZD ($) |
Stock Status |
|
(A) - 100 x 10mm - Octagonal |
GE7027 |
$ 15.90 |
|
|
|
(B) - 125 x 12mm - Octagonal |
GE7028 |
$ 16.50 |
|
|
|
(C) - 150 x 15mm - Octagonal |
GE7029 |
$ 17.60 |
|
|
|
(D) - 175 x 20mm - Octagonal |
GE7030 |
$ 20.96 |
|
|
|
(E) - 100 x 16mm - Flat |
GE7031 |
$ 15.90 |
|
|
|
(F) - 125 x 18mm - Flat |
GE7032 |
$ 16.50 |
|
|
|
(G) - 180 x 22mm - Flat |
GE7004 |
$ 22.28 |
|
|
|
(H) - 200 x 25mm - Flat |
GE7005 |
$ 25.90 |
|
|
|
(I) - 250 x 28mm - Flat |
GE7006 |
$ 29.08 |
|
|
|
|
Estwing Long Chisel - NEW |
Estwing Chisels are made from the highest quality steel,
imported from the USA. These NEW redesigned chisels now have
an improved hard wearing rubber grip handle with a special
hammer cap for striking. They have been tried and tested with
improvements made following recommendations from geologists.
305mm long x 16mm chisel end. Striking cap is 30mm diameter.
|
|
Code |
NZD ($) |
Stock Status |
|
305mm x 16mm (wide) |
GE7003 |
$ 57.00 |
|
|
|
|
Estwing Wide Splitting Chisel - NEW |
Estwing Chisels are made from the highest quality steel,
imported from the USA. These NEW redesigned chisels now have
an improved hard wearing rubber grip handle with a special
hammer cap for striking. They have been tried and tested with
improvements made following recommendations from geologists.
215mm long x 72mm chisel end. Striking cap is 45mm diameter.
|
|
Code |
NZD ($) |
Stock Status |
|
215mm x 72mm (wide) |
GE7002 |
$ 55.90 |
|
|
|
|
Estwing Splitting Chisel - NEW |
Estwing Chisels are made from the highest quality steel,
imported from the USA. These NEW redesigned chisels now have
an improved hard wearing rubber grip handle with a special
hammer cap for striking. They have been tried and tested with
improvements made following recommendations from geologists.
220mm long x 31mm chisel end. Striking cap is 45mm diameter.
|
|
Code |
NZD ($) |
Stock Status |
|
220mm x 31mm (wide) |
GE7001 |
$ 57.00 |
|
|
|
|
Estwing Wedging & Prying Chisel |
Estwing Chisels are made from the highest quality steel,
imported from the USA.
|
|
Code |
NZD ($) |
Stock Status |
|
220mm (pointed) |
GE7000 |
$ 55.90 |
|
|
|
|
Stone Chisel |
Tampered Steel specifically produced for use on hard rocks
(especially granite and harder). Stays sharp for much longer
than other types of chisels.
|
|
Code |
NZD ($) |
Stock Status |
|
205mm x 45mm (wide) |
GE7011 |
$ 33.90 |
|
|
|
Economy Chisels |
These chisels are suitable for beginners and are basic cold
chisels. They are suitable for softer rocks or occasional use,
but are not recommended for heavy use or use on harder rocks.
|
|
Code |
NZD ($) |
Stock Status |
|
200mm x 10mm (wide) |
GE7009 |
$ 7.90 |
|
|
|